Arthritis, 3D digital modelling and 3D printing

Featured

As a jeweller, I didn’t know when embarking in 2000 on a research fellowship that I was develoing arthritis in both my thumbs. The research I did eventually led to the development of a haptic 3D modelling package (Anarkik3D Design). In a blog in 2012 I wrote that I used Anarkik3D Design and 3D printing to design and make my daughter’s wedding ring. I didn’t mention in the blog that I had to use 3D printing because it was too painful to hold a small ring securely as well as holding the tools to carve the titanium. I just said that this was now hard for me to remak at the bench.

Wedding-ring 3D printed in titanium

Wedding-ring 3D printed in titanium

In these five years since, I have used Anarkik3D Design a lot, both testing each version that comes out and designing samples to 3D print out for classes and for corporate commissions. The haptic device we use has a spherical grasp with 4 buttons and I am really pleased that using it to design causes very little pain, even after a long session.

Falcon haptic device

Falcon haptic device

Having my designs 3D printed means that much of the making that previously would have been done at the bench has been accomplished using this technology. I can cope with light bench work such as finishing pieces, adding brooch pins and ear fittings, connecting units into a necklace etc..

Necklace 3D printed in paper

Necklace 3D printed in paper

I designed this necklace a couple of years ago and had units made for 3 necklaces, one for myself and the other 2 for two women to celebrate the super work they do promoting 3D printing.

Last year I made an exhibition piece, the first for a very long time. I was, with 20 or so others, invited by the Association for Contemporary Jewellery to send in a new piece of work for their 20:20 Vision Exhibition which opened in January and will tour for a year or so. I designed and prototyped various units, with the final ones printed in paper and strung onto Ninjaflex. And the process was almost pain free as it was very light work. The blog on the prototyping process is here.

Neckpiece in 3D printed paper

Neckpiece in 3D printed paper

Now with an exhibition at Galerie VundV in Vienna planned for October/November 2017 I am really looking forward to getting back to designing and making a cohesive collection of pieces. This will be my first show of work where I have used our Anarkik3D Design package exclusively to do the designing for 3D printing! Exciting year in store!

Book’s progress towards publication in September

04.03.2013. A week ago my editor sent me the rough layout of a few of the pages of my book, with the relevant images and ‘boxes’ to ask if I was happy with the design concept. My editor is aiming to have the samples approved by 8th March so she can start laying out the entire book with all the images in place so we can make any changes needed i.e image sizing (and I might have to request higher res pics from some contributors if the images are to be scaled up) as the next stage is the final layout  The book is pretty rich image wise from about 50 designer makers and applied artists and I can’t thank them all enough for the beautiful photographs they have sent to me to use to illustrate the chapters. 

I hope to get down to London to see the final layout because once all this is done and all agreed, it will be sent, I gather, to China to be printed. The date for publishing is set for this September 2013!

So excited! 

World first – 3D printed titanium wedding ring?

Could this be a world first – a wedding ring in 3D printed titanium?

Kari's wedding and engagement rings

Kari's titanium wedding ring and gold engagement ring


I designed and made my elder daughter Kari’s wedding ring for her marriage to Rob this last June in a beautiful setting in the Scottish countryside. It was a perfect day. It didn’t even rain.
Rob proposed to Kari. She wanted a specific engagement ring, one I had designed and made in titanium, machined and hand carved to flow around an oval diamond in a gold setting. This is now hard for me to remake but in January this year i-materialise announced their new service – 3D printing titanium (see http://bit.ly/hHMMnL) and Kari and Rob agreed enthusiastically to have it made this way. Personally, this was perfect as I am a 3D print evangelist (since a Stuart Devlin Masterclass at the Worshipful Company of Goldsmiths in London in 1990) and I could 3D model it in Cloud9. The design would be super fluid with titanium flowing around the diamond of an interlocking gold engagement ring.

With this general concept my daughter and I visited London’s Hatton Garden to look at diamonds before she and Rob chose one – a beautiful square corner cut one.

3D printed titanium with nylon prototypes

3D printed titanium with nylon prototypes


Jeweller friend, Teena Ramsey, and I then finalised the designs for both rings which were then 3D printed as prototypes nylon for Kari and Rod to see, check ring size, how they slotted together, and for Teena to work with.
With all checked and approved an .stl file of the wedding ring was sent to i.materialise and in 2 weeks I was working on the titanium! Once finished we fitted them together – it looks as though the diamond is floating within the flowing titanium bands.
Kari’s 3D printed titanium wedding ring and gold and diamond engagement ring

Kari’s 3D printed titanium wedding ring and gold and diamond engagement ring

 Mum, having made my wedding ring has given us a unique and special gift and our rings are now all the more precious to us.’  Kari

The wish for easy 3D modelling for access to 3D printing …

It has been an amazing year for 3D printing and there are some interesting threads on various blogs to follow on through.

A year ago Fabbaloo posted their “wishes for 2010” and one was for Easy 3D Software as the packages on offer do require a lot of learning to become fully capable. My issue with most is that they have un-needed complexity. With too many functions also cluttering up the interface many are put off by the steep learning curve and thereby exclude from access to 3D printing.  In Fabbaloo’s wish list  there were 2 developments in 2010 they noted that improve the position:

  • Google Sketchup 8 was released, including some interesting features. This free tool is the gateway for many people introduced to the technology.
  • Anarkik3D released version 2 of their haptic-based 3D design software. While not yet widely used, this approach cou

    Anarkik3D: Cloud9 interface and design for bangle

    ld make things a lot easier for 3D modellers.

Anarkik3D’s haptic based 3D design software is Cloud9 and our distributor (A1 Technologies) imports the Falcon haptic device from Novint in the United States, bundles the software and device together and markets the package as Chameleon.

Another blog (RPES blog) on August 10th covered the designer jewellery created by Farah Bandookwala during her Master’s Degree at Edinburgh College of Art. I have already written about Farah’s work in this blog as she had a residency with us in Summer 2009 to investigate using Cloud9 for her work and we have worked closely with her since then.

To quote from Rachel’s blog: ‘Using Chameleon alongside a traditional 3D CAD package, Rhino, Farah found that the differences between the two software packages were extreme. Most notable was that while the 3D CAD offered control and precision with surfaces, it just could not compare with the ability to freely sculpture the shapes by directly deforming and manipulating surfaces to create the desired morphing. Indeed it is the freedom of the software that is one of the greatest attractions for truly creative design, with no constraints.

Farah secured sponsorship with Shapeways and LaserLines to have her designs 3D printed, from concept stage where she experimented with constructions and fastenings, through to the dyed and finished pieces into which she embedded magnets as connectors.

Farah’s work proves that Fabbaloo’s ‘easy 3D software’ wish for 2010 is here already, as Cloud9 has levels of usability and functionality that are balanced, a rubust .stl format for 3D printing (of course) and compatibility with CAD, it is affordable (£495 with the Falcon haptic device) and it is available (A1 Technologies).

Replicator’s  blog on December 23, 2010 about ‘Who is Getting Interested in 3D Printing? Server Log Stories‘ by Joseph Flaherty says that, yes, ‘3D printers are an amazing technology, but haven’t yet broken into the mainstream. Largely because companies haven’t figured out a way to profitably employ them. Yet. However, based on my Google Analytics I can see some interesting companies are looking into the technology. These are big companies and if they apply 3D printing to their businesses it will make for some really awesome products.’

I am interested in Joseph’s focus on Fire Mountain Gems‘ an ecommerce powerhouse that serves the multibillion dollar home jewelry making market. Using their catalog and online shopping carts crafters crank out beautiful pieces of jewelry. It seems though that the folks at Fire Mountain might be interested in how 3D printing could expand their service offering’. How I agree, as I am sure would Farah, as 3D printing materials are developing fast with steel, ceramics and glass now available at Shapeways, expanding the plastics, nylons, and starches, the range of colours, and resolutions now on offer. We will watch with interest and expect to see a category for 3D printed beads in Fire Mountain Gems catalogue!

On Anarkik3D’s blog I am covering an Mcor/Anarkik3D project as Cloud9’s capability for organic forms, combined with 3D printing in layers of coloured paper using Mcor’s Matrix printer, will illustrate beautifully the potential their technology has for designers. I am particularly interested in the use of actual 3D printed pieces as end products.

Joris Peel’s blog at Materialise has a review of the highlights of 2010 and is well worth reading. His clips for November 23rd cover .MGX opening its flagship store in Brussels, the world’s first store for 3D printed goods.

This area of ‘off-the-machine’ making is now a very exciting, well established state of things, with great designs available from a growing number of companies and individuals. One major example –  see the FOC Collection

What would Fabbaloo wish to happen in 2011?

· A capable and assembled 3D printer for under USD$1500. Yes, especially for early concept work.

·  A consumer-oriented online market for 3D models. I agree with them that Thingiverse is oriented around makers, not consumers. Shapeways and Ponoko’s business models could be tweaked to develop a more consumer orientated online resource but Sculpteo has with its company name more potential to attract those customers who are seeking more ‘desirable’ less techie things to 3D print.

It would be good to have somewhere appropriate to put out some 3D Cloud9 designs as .stl that others can access and get printed – as Fabbaloo says ‘Things They Like. Not things that engineers like to print’. I have put one (my apple and worm) on our Anarkikangels’ website – maybe we should have more!

Virtual 3D world is very bright and tangible – but not pink!

Fabbaloo published an article about Bits from Bytes about getting a new website and unveiling a RapChick at Euromold last week! What is a RapChick?

The new RapChick is a 3D Printer Kit  designed ‘especially for female users in response to the growing numbers of women engineers and creators within our community.  The RapChick features pink accents and unique branding that will appeal to this rapidly expanding, underserved audience’. Unlike Fabbaloo my immediate response to the above description was not favourable and neither were the first 2 comments to their article. Why is it assumed that woman engineers are not capable of building the Rapman? Many creators are capable too but there are those who also have better/more pressing things to do, like design, make and market, than spend precious creative time, and money, building for the technical exercise and a few quid off.  A good few like myself really don’t want to grapple with techie stuff: we don’t understand it nor do we want to. But we want to 3D print.

The RapChick’s ‘pink accents’ did made me see red as it seems that pink plus the branding were the only design differences between the RapChick and the Rapman! There is an excellent article by Femmeden http://www.femmeden.com/pdf/SmartDesign_SexontheBrain.pdf  that explains precisely why I was incensed. And all designers should read it. 

Seriously, I do applaud what BfB are doing but to truly democatise 3D printing (as BfB say they are doing), they have to also appeal to all rapidly expanding, underserved audiences. For non technical groups Rapman and RapChick kits are not the way to do this.

Development must be on usability and understanding how to include people of all ages who have different learning styles, requirements and preferences who want to engage with this very exciting technology. So thank you, Shapeways, Sculpteo, and I am sure Ponoko – I haven’t experienced their 3D services yet – for making the route to 3D printing so straightforward.

 Thre is a remaining barrier to more people being able to use 3D printing: how to create that virtual model. CAD is not suitable for many on many levels. It is prescriptive, has a huge learning curve, designed for operatives working with it almost full time, complex interface, too many functions that will never be touched or used, too expensive and difficult to justify when used sporadically in conjunction with other tasks such as making and marketing. It does not fit comfortably, for example, with the way many in the applied arts work within their disciplines of ceramics, jewellery, metalwork, furniture, accessories etc.

The main influencers to many budget holders, responsible for selecting and recommending 3D hardware and software for schools, colleges, workshops, fablabs, are themselves CAD users and do not fully grasp the divide that exists. Many in the arts have turned technophobic, overwhelmed by complexity and prescriptiveness, becoming a barrier unto themselves and teachers for their pupils to the extent that digital technologies are now off their radar.

I only fully grasped why our haptic Cloud9 3D sketch modelling software was special when I read the femmeden article (link is above) a few years ago – Cloud9 is INCLUSIVE. CAD isn’t. By using a haptic device to replace the 3D mouse, to give the user 3D ‘virtual touch’ and movement in 3D, interaction in the digital environment remains familiar. Cloud9 is so intuitive and free flowing, serendipity is a default. It is  easy to learn and to use, and fun (virtual 3D touch is special), caters for all stages of creativity (amateur to professional), can be picked up quickly again after a long break as the non complex interface taps into our more natural way of interacting in 3D, is being developed with the feed back from stakeholders and other users about what they want and need and how they want to work, and unbelievably the software and the haptic device bundle together costs under £500.

It can also be difficult to justify even this until the enormous potential of 3D printing is understood! And from Cloud9 you can 3D print your model directly. £500 then becomes a no brainer. Design companies internationally are buying Cloud9 as it fits into their design pipeline and complements CAD. Schools are purchasing: all kids should now be able to access 3D technologies. Colleges are buying into it too.

Previously I spotlighted Farah Bandookwala. She uses Cloud9 with Rhino, and Shapeways for tangible output for her whole Masters Degree Show. Have a look on her website: http://www.farahb.com. See Shapeways, Ponoko, FoC and so on for the rising numbers of applied artists working internationally who are using 3D printing to create wonderful pieces of work. 

Creativity and the inspiration for this fantastic work can be sparked off by having a good understanding of the process of 3D printing and the properties of the material used. The BfB products are excellent for seeing the build up happening and therefore understanding the affordances and constraints. Plus the resulting parts are inexpensive enough to experiment and play with so this valuable part of creativity is not checked by any ‘preciousness.’

What many of us need then is not so much the Rapman kit but a ready built 3D printer with easy processing of 3D data at an entry level price in a workshop/fablab nearby as this way it would get more usage and more people engaged. 

3D virtual world is indeed very bright and tangible.

Bits From Bytes

something just ‘clicks’

When people try Anarkik3D’s Cloud9 haptic software something just ‘clicks’. It is this gut reaction that is interesting as it validates the 4 years of research work (Tacitus Research Project) that formed our approach to development.  and is embedded with the values from designing and making.

 The main research site was Edinburgh College of Art and we had designer makers test the haptic software demonstrators in iterative user centred trials with their feedback informing all stages of development. Cloud9 is the result; haptic software which, combined now pragmatically, with affordable hardware, seems to be a distillation of designer maker ways of thinking.

I recommend this white paper by FemmeDen as so much in it articulates what we are about! Titled ‘Sex on the Brain’ it is by 4 women designers at SMART Design Company (New York/Barcelona) and is a call for a more ‘universal’ approach to designing and solidly references very interesting research findings. http://tinyurl.com/c9g35n

The Research team, and now the development team at Anarkik3D, is more or less balanced between the arts and science. There is a bias towards the arts, specifically designer makers and applied artists, and a bit towards women as a female designer maker (me) led the research project and is the companys’s CEO. Any overt influence is adjusted by a well balanced technology side!

The FemmeDen whitepaper explains why we have a more ‘unconventional’ approach to developing 3D modelling on computer when compared to that of conventional CAD and other 3D modelling packages which are very prescriptive and precision based. Yes it is more female biased but I prefer the terms non gender biased and ‘universal design’ as the Cloud9 haptic package appeals to designer makers of both genders. 

We are also serious about providing a useful professional level ‘tool’, one that enables designer makers of both genders to access all the benefits and advantages of digital 3D modelling and access to 3D printing. To slot in well to their pipeline of designing and making, it is crucial that a level of competence can be achieved swiftly, and retained, without jeopardising the all important time in the workshop to make, as well as the time to explore and experiment with real materials and processes as these are fundamental for understanding the constraints and affordances for making successfully.  It is through this hands-on process that designer makers build an important source of knowledge, albeit tacit, that is needed for good concept generation and designing. And by continuing to ask designer makers to feed back their thoughts to us to improve Cloud9 for how they want to work Anarkik3D can develop a valuable universal tool that suits a wider range of people.

This is a very good place then to thank all the designers, designer makers and artists who since 2000 have contributed to the development of Cloud9. Please stay on board as we will to develop it.

 See MA Student Farah Bandookwala at www.hapticjewellery.ning.com

Summer placement to create new jewellery designs

Farah Bandookwala will be working with Anarkik3D over the summer and her blog with pics of her work in progress can be seen here http://hapticjewellery.ning.com/.

She has opted for a Placement with us as part of her course as an MA Student studying at Edinburgh College of Art. Through a combination of processes including rapid prototyping, she is creating jewellery made up of modular units that allow the wearer to manipulate and transform the adornment as their sense of self changes.

Farah creating haptically

Farah creating haptically

She will explore the use of our haptic application, Cloud9, as a tool, on its own and to make CAD models more dynamic and organic, towards creating forms for rapid manufacture. By having the means to work more intuitively at this concept generation stage she can experiment more deeply and widely with complexity of form, and function to produce 3D prototypes, both digital and tangible to explore and test her premise – the possibility that identity is a fluid entity, and her aim to allow the wearer to convey this changing sense of self over time.

 “Through my work I argue the need for contemporary jewellery to develop and form a new, perhaps much more complex, flexible way of expressing changeable notions of self. Rather than dictating meaning through form or composition, I would like the work to be open to the wearers’ own expression of self over time.”